Servo Motor Pull Network Construction Mesh Welding Machine Steady
1. Host framework structure, stable performance, the welding
pressure is continuously adjustable, solid and perfect welding
2. Integrated deceleration electromagnetic brake motors for power,
inverter control, adjustable speed.
3. Modular design for the upper and lower electrodes, convenient to
adjust the mesh.
4. The mesh pulling part driven by servo motor can be set a variety
of weft space in the same mesh, pull the mesh continuously back and
forth to extend the size of mesh, and use pneumatic clamping device
to accurate weft spacing.
5. The warp feeding part driven by stepper motor can be fed the
warps which a whole mesh needs when welding, so that the machine is
very short interval of time.
1. This machine is a professional equipment for mesh production.It
adopts the digital control technique,apply to placing
wire,welding,pulling mesh etc.The weft wire falling automatically
and the line wire feeding manually.Using compressed air as the main
power.It adopts the servo motor to pull the mesh.The accuracy can
be controlled within 0.01mm and length of the mesh be controlled
2. The machine is equipment with LCD touch screen and operated
convenient about the welding time,welding aperture,length of the
3. The advantage:advanced technology,strong adaptability,product
yield,quality and stability.
|Wire diameter||3-8mm||Welding aperture|
|Welding speed||40-50times/min||Rated electrical power||125KVA*8|
|Width of mesh||300mm||Length of the single slice||≤12m|
|Electric control cabinet||8 pieces||Air pressure||0.6-0.8MPA|
|Grid error||≤0.10mm||Length error of the grid||≤2mm/piece|
It is mainly used in large industrial workshop,large
venues,factories flat,bridge deck pavement,road surface,tunnel
lining,the subway engineering ,high way engineering,building
engineering,airport construction etc.