Double Edge Fence Mesh Welding Servo Motor To Repeated Pull Mesh
This machine adopts synchronous control technique. The
center-control and welding time are composed of PLC program system.
The input front-panel has two forms, touch screen and keyboard that
makes the machine more intelligent and reasonable and it could
press at one time, welding repeatedly. The hopper adopts the step
motor; brake motor wheels; pulling the wire net is controlled by
the step motor. The line wire and the weft wire are
pre-straightened and pre-cut. The longitude wires can be adjustable
and cross wire distance can be adjustable according to input the
data what you want. The greatest advantage is that you can adjust
the distance of weft wire at random on the same piece of wire mesh
sheet. The finished product—fence panel is smooth, the error of
opposite angle line is small.
1. Feeding material:
The warp wire and weft wire are straightened and cutted from coil
wire material ,realized by auto straightening and cutting machine.
The warp wire are placed on a corresponding wire penetrating mold
by worker, and the weft wire will be automatic falling down one by
one ,from the weft wire system
2. Welding mesh panel system:
The main machine starts welding and adopts a synchronous control
technology, both branch control welding time and welding time are
controlled by a Mitsubishi PLC digital programming system, and the
mesh opening size can be adjusted only by direct input on a touch
screen; and it could be exist different weft distance on one piece
of one mesh sheet
3. Drawing mesh panel system:
Panasonic ( Japan ) step motor controls the whole automatic mesh
panel drawing process until one mesh panel finished, and the
automatic mesh connecting and discharging system is started; the
welding of the next mesh is started.
1 . fence mesh for railway, highway, airport bridge and
2 . Mesh panel for goods shelf and storage racks.
|Automatic Double Edge Fence Mesh Welding Machine Production Is Fast
, Low Noise|
|Wire Diameter||2.5mm - 6mm|
|Width of Mesh||2000m ( can be customize )|
|Welding Speed||45 - 90 times/min|
|W elding Aperture||50 * 50 - 200 * 200 ( mm )|
|Welding Spot||48 ( can be customized )|