Transformer Water Cooling Building And Constrction Welded Mesh
1, This machine is controlled by the special computer, the welding
current and welding time in each welding transformer can be
individually adjusted. The machine operating interface is made up
with color touch screen and control buttons, easy to operate.
2, Host framework structure, stable performance, the welding
pressure is continuously adjustable, solid and perfect welding
3,Integrated deceleration electromagnetic brake motors for power,
inverter control, adjustable speed.
4, Modular design for the upper and lower electrodes, convenient to
adjust the mesh.
5, weft-hopper obtains wires by motor driver devices, electric
magnetic increase feeding device auto-feeding the wefts into the
preparation area of disc device from the large hopper, and the weft
hopper is installed in the removable pull rid, convenient to adjust
6, The mesh pulling part driven by servo motor can be set a variety
of weft space in the same mesh, pull the mesh continuously back and
forth to extend the size of mesh, and use pneumatic clamping device
to accurate weft spacing.
7, The warp feeding part driven by stepper motor can be fed the
warps which a whole mesh needs when welding, so that the machine is
very short interval of time.
1. Water-cooling transformer and water-cooling lower electrodes to
make sure the welding firm during a long working time, and prolong
the service life.
2. Feeding and Welding System Cross wire feeding: Firstly, the coil
wires are straighten and cut into fixed length by straightening
cutting machine, which become weft wire. Then worker put the weft
wires into wire hopper. Wire hopper under the control of step
motor, the weft wires falling automatically one by one
Line wire feeding: warp wires are the same to weft wires, firstly
use straightening cutting machine to straighten and cut coil wire
into fixed length. Then the line wires are sent by labor and fed
automatically, when it welding and drawing, labors can prepare the
wires, it increases the production efficiency.
3. The mesh pulling system is controlled by step motor, which makes
the pulling mesh aperture more standard and accurate.
Construction mesh , building roof mesh, floor warming mesh,
seed-bed mesh, flower room mesh
|Transformer Water Cooling Building And Constrction Welded Mesh
|Longitude wire space||100-300mm|
|Cross wire space||Min.50mm|
|Wire feeding way||Pre-straightened & pre-cut|
|Welding speed||50-75 times/min|