High Production Easy Operation Automatic Rebar Stirrup Bending
Rebar Stirrup Bending Machineis designed by the experenced
engineers.This machine combanate straightening,bending and cuntting
three function together,this reduce the number of worrker and
enhance the productivity. The wire can bend into any shap in 180°.
Many years enperience of producing this series of machines ensure
the high safety during it working. And the design suit human
engineering,so the worker can operate conveniently.
This machine is widely used in constrution site,the rebar producing
factory and so on. It can work 18 hours continuly.
1. There is only one step from a raw material to the forming
products only one step.
2. High production efficiency, equivalent to twenty to thirty
3. Easy operation, only need one worker, save manual work.
4. Save raw materials,Work in continuous forming almost unforeseen
materials head loss
5. Small floor space. Save the work space, Can work in a narrow
|Working Capacity||Single Round Wire Diameter:||∅4-10mm||Double Round Wire Diameter:||∅4-8mm|
|Single Ribbed Wire Diameter:||∅4-8mm||Double Ribbed wire Diameter:||∅4-6mm|
|Max.Bending Angle:||180°||Central Mandrel Diameter:||∅20-30mm|
|Max. Pulling Speed:||100m/min||Max.Bending Speed:||1800pics/h|
|Rated power||2Servo motor:||11kW+7.5kW||1Brake motor:||4kW|
|1motor for air pump:||4kW||Voltage:||380V/415V|
|Average Electric Power Consumption:||5kW/h||Working Environment Temperature:||-5~40|
|Overall Size:||3500×950×2000mm||Gross Weight:||2.35T|
Steel bar bending machine is an ideal equipment for bending
threaded steel bar, smoothly steel bar, flat steel, square steel
and angle steel. it is widely used in building, bridge, railway